- Source / “Laser Ready” Files – Leather Small Trucker Wallet (source)
Want to try this design WITHOUT a laser? It’s available as a free PDF download HERE.
Usage Note: You are free to use this design to create and even sell the end product. However, you cannot redistribute this template in any form.
Inventory of Tools
- 36″ x 24″ Self Healing Cutting Mat
- Masking Tape
- Scratch Awl
- No.2 X-ACTO Knife
- Dremel with Sanding Bit
- Wood Slicker
- Dremel Burnishing Bit
- Aquilim 315 Cement
- Glue Pot
- Plastic Spreaders
- Finishing Hammer
- Thread Nippers
- Table Clamp Stitching Pony
- Fiebings Pro Dye (Black)
- Empty Paint Marker
- Neatsfoot Oil
- Bick 4 Leather Conditioner
- Wire Clips
- Bone Folder
- Dummy Credit Cards
- Wing Divider
- C.S. Osborne Scratch Awl
- John James Stitching Needles – 002
- Generic Sandpaper – 320 Grit
- Tiger Thred (Cigar – .6mm)
- Tokonole Burnishing Gum
- Seiwa Edge Beveler (#1)
- YKK Finished Zippers
- Line 20 Snaps
- Snap Setter Dies
- BG Hand Press
Leather Selection
In this video we used Valdibrana Conceria, Tarano Italian Vachetta Leather – 3.5oz (~1.5mm) thick. This pattern is designed for a leather in that thickness range. Slightly thicker or slightly thinner will probably work but it is optimized for 1.5mm. If you are laser cutting I HIGHLY suggest sticking with a pure vegetable tanned leather.
Guidelines of Template Usage
We put a lot of time and effort into producing these templates, videos, and blog posts. Please do not distribute the template you have purchased from Makesupply. It’s not cool and hurts our feelings (CRY EMOJI). However, you are free to do whatever you want with the end product you create using the template design. Even sell them on Etsy!
